Geo Knight DK7T Twin Station Cap Press with 70 Presets

The heart of the DK7T is its twin-station pivot design. Instead of waiting on a single platen, you work two positions at once.

• Press on one side while loading and aligning the next cap on the other
• No dead time between cycles, so your hands never stop moving
• More hats per hour without adding a second operator or a second machine

This is the difference between running a production line and babysitting one press. For shops fighting throughput bottlenecks, the pivot design turns waiting time into working time.

Inconsistent heat means scorched transfers and wasted hats. The DK7T runs fully digital temperature control with a range of 32°F to 600°F and ±2°F accuracy, so every press lands in the same spot.

• Temperature display in °F or °C, your choice
• Automatic digital timer with dual pre-press timer functionality
• Timer range of 0 to 99 minutes 59 seconds, or up to 99 hours 59 minutes
• Temperature drop alert warns you before a cold press ruins a hat
• Cycle counter tracks your total number of presses
• End-of-cycle alarms with 10 selectable beep patterns, plus optional keypad sound control

You press with confidence instead of second-guessing the dial, and your output stays identical across every operator on the floor.

Switching between designs used to mean resetting temperature and time by hand every single job. The DK7T stores 70 programmable presets so you load a saved setting in seconds.

• Quick preset loading through the membrane keypad interface
• Repeatable workflows for multi-design shops juggling many jobs
• Manual pressure adjustment with preset reference support to match each recipe

Faster job switching means less standing around and more finished caps at the end of the day.

Caps shift. When they do, you get crooked, uneven transfers. The DK7T fixes this with a curved 1/2-moon hold-down device that locks each cap in place through the whole press cycle.

Three interchangeable bottom forms come included so you can match the shape to the hat:

• Standard form at approximately 4" x 7"
• EURO form for mid-sized caps
• Youth form for child-sized hats

Between the forms and the hold-down, the press handles large, standard, youth, fitted, and low-profile caps with clean, centered results every time.

A full production day is hard on your hands and back. The DK7T is engineered to take that strain off you.

• Self-lifting gas spring raises the platen for you, cutting operator fatigue
• Wide-opening clamshell gives you room to load and unload fast
• Adjustable pedestal dials in platen alignment for a level press

Less effort per cycle means you stay productive through long runs instead of burning out by lunch.

This is a production upgrade, not a hobby press, and the construction proves it.

• Solid steel frame stands up to constant daily work
• Hardened high-strength pivot points keep the twin stations true over years of cycling
• 3/4" thick heat platen holds and spreads heat evenly
• Teflon-coated platen surface for clean release and easy wipe-downs

Every part is chosen to survive the punishment of a busy shop, so the machine keeps earning its place on your counter for the long haul.

This press earns its keep in shops running real volume. It fits you if you are:

• Print shops pushing large batches of headwear daily
• Apparel businesses that need standardized quality across operators
• Custom merch operations switching between many designs in a shift

If you are an intermediate to advanced shop owner tired of single-station bottlenecks, ruined hats, and lost time between jobs, this machine is your throughput multiplier.

Your DK7T arrives ready to run with everything you need:

• DK7T cap press machine
• Standard curved cap form (4" x 7")
• EURO bottom form
• Youth bottom form
• Cap hold-down device
• Silicone pad
• Power cord with inlet/switch kit
• User manual

It ships with a lifetime warranty on the heat platen, a 5-year warranty on the frame, a 3-year warranty on the controller, a 1-year warranty on parts, and free lifetime tech support.